P1219 Internal Connectors
p1219

P1219 Internal Connectors

£0.01

P1219 Internal Connectors

P1219 Internal Connectors c/w M6 x 12mm Screws are designed to join lengths of Unistrut or equivalent channel together. A coupling is a device used to connect two shafts together at their ends. Installation and maintenance of couplings can lead to reduced maintenance time and maintenance costs.

 

  • Dimensions: 21mm x 41mm x 250mm
  • Hole Size: 6mm tapped
  • Weight: 0.250Kgs
  • Finish: Pre-galvanised to BS EN 10346:2015

Prod Code: CS45/P1219

Next Day Delivery – UK Mainland.

Internal Connectors from Network Cable & Pipe Supports are designed and manufactured to the highest quality standards (ISO 9001:2015).

Channel Couplers

strut

Pre-galvanised is a sheet that is uncoiled and passed through a reducing atmosphere prior to immersion in the galvanizing bath for a relatively short period of time. Upon withdrawal from the galvanizing bath, either an air knife or mechanical wiper is used to remove excess zinc so producing a good surface finish.

BS EN 10346:2015 specifies requirements for continuously hot-dip coated products made of low carbon steels for cold-forming, of steels for construction, and of steels with high proof strength for cold forming coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ), aluminium-silicon alloy (AS) or zinc-magnesium alloy (ZM) and for continuously hot-dip coated products made of multiphase steels for cold-forming coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA) or a zinc-magnesium alloy (ZM) in thicknesses of 0,20 mm ≤ t < 3,0 mm.

Unistrut P1219 41 x 21 x 200mm Internal Coupler Pre-Galvanised

Additional Information

Weight .250 kg
Dimensions 2.1 x 4.1 x 25 cm