CS48/P1377 External Connectors
p1377

P1377 External Connectors

£0.01

P1377 External Connectors

P1377 External Connectors are designed to join together lengths of Unistrut or equivalent channel.

A coupling is a device used to connect two shafts together at their ends. Installation and maintenance of couplings can lead to reduced maintenance time and maintenance costs.

 

  • Dimensions: 41mm x 41mm x 185mm
  • Hole Size: 14mm diameter hole
  • Weight: 0.850Kgs
  • Finish: Hot Dipped Galvanised to BS EN ISO 1461:2009

Prod Code: CS48/P1377

External Connectors from Network Cable & Pipe Supports are designed and manufactured to the highest quality standards (ISO 9001:2015).

Next Day Delivery – UK Mainland.

Channel Couplers

strut

Pre-galvanised is a sheet that is uncoiled and passed through a reducing atmosphere prior to immersion in the galvanizing bath for a relatively short period of time. Upon withdrawal from the galvanizing bath, either an air knife or mechanical wiper is used to remove excess zinc so producing a good surface finish.

BS EN 10346:2015 specifies requirements for continuously hot-dip coated products made of low carbon steels for cold-forming, of steels for construction, and of steels with high proof strength for cold forming coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA), aluminium-zinc alloy (AZ), aluminium-silicon alloy (AS) or zinc-magnesium alloy (ZM) and for continuously hot-dip coated products made of multiphase steels for cold-forming coated with zinc (Z), zinc-iron alloy (ZF), zinc-aluminium alloy (ZA) or a zinc-magnesium alloy (ZM) in thicknesses of 0,20 mm ≤ t < 3,0 mm.

Unistrut P1377 Channel Coupler 41 x 41 x 172mm Hot Dipped Galvanised

Additional Information

Weight 0.850 kg
Dimensions 4.1 x 4.1 x 18.5 cm